Citizen CT-S310II Bedienungsanleitung

LINE THERMAL PRINTERMODEL CT-S310IIUser’s Manual

—7—CAUTIONTo prevent injury and printer failures from worsening, observe the following: While the paper cover is open, be careful to not touch the ma

—8—1. GENERAL OUTLINE...91.1 Features ...

—9—The CT-S310II line thermal printer series is designed for use with a broad arrayof terminal equipment including data, POS, and kitchen terminals.Th

—10—Make sure the following items are included with your printer.Model numbers indicate printer features according to the following classificationsyst

—11—Notes:*1: When paper width is 80 or 58 mm.*2: The number of printable columns is selected using a memory switch.The numbers of columns noted in th

—12—Names of partsz Paper coverOpen to load paper.z Cover open leverUse this lever to open the paper cover.z Front coverOpen and close this cover to c

—13—Operation panelz POWER LED (green)Lights when the power is on, turns off when the power is off.Flashes when data is incoming or a memory error has

—14—Rear connectorsz Interface connector (USB, serial)Connects to the interface cable (USB, serial).z Cash drawer kick-out connectorConnects to the c

—15—z PlatenFeeds the paper.z Manual cutterFor cutting the paper manually.z Auto cutterFor cutting the paper automatically.z Print head (thermal)Print

—16—z BuzzerBuzzes when errors occur or when operations or command operations areperformed.z User memoryYou can save user-defined logo and character d

WEEE MARKEnWenn Sie dieses Produkt entsorgen wollen, dann tun Sie dies bitte nicht zusammen mit demHaushaltsmüll. Es gibt im Rahmen der WEEE-Direktive

—17—z Paper saving functionsYou can set the following functions to save paper by setting the MSW8-3 to8-5 memory switches.• Delete top marginThe print

—18—1. Turn off the power.2. Connect the AC power cord to the AC inlet, and insert the plug into an electric outlet.3. SETUP3.1 Connecting the AC Powe

—19—1. Turn off the power.2. Orient the interface cable correctly and insert it into the interface connector.Use a serial interface cable with the con

—20—1. Turn off the power.2. Confirm the orientation of the cash drawer kick-out cable connector and connect itto the cash drawer kick-out connector a

—21—(1) Connector pin configuration(2) Electric characteristics1) Drive voltage: 24 VDC2) Drive current: Approx. 1 A max. (not to exceed 510 ms.)3) DR

—22—The printer can be used horizontally, vertically, or installed on a wall.Vertical installationUse the rubber feet provided when using the printer

—23—1. Turn off the power.2. Pull the cover open lever forward and open the paper cover.3. Set the partition provided in a slot that matches the size

—24—The service life of the print head was increased by reducing the pressure that itcontacts the paper.Long Life Print (LLP) is enabled by changing t

—25—1. Turn on the power.2. Pull the cover open lever forward and open the paper cover.3. Load the paper roll so that the printable side of the paper

—26—Attach this cover to prevent the power switch from being used.1. Press the power switch cover onto the power switch compartment until it clicks.Pu

Declaration of ConformityThis printer conforms to the following Standards:The Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC, the RoH

—27—A dirty print head or platen may reduce printing quality or cause malfunctions.We recommend cleaning the printer periodically (every 2 to 3 months

—28—The ERROR LED flashes and the auto cutter blade remains extended because aforeign object or paper jam is obstructing it.If the ERROR LED is flashi

—29—The paper cover is designed to be opened if the cutter locks by pressing thecover open lever. If the blade of the auto cutter still remains extend

—30—While paper is loaded, press and hold the FEED button while turning the poweron. Hold the FEED button down for about one second and then release i

—31—Print received data in hexadecimal. If problems such as missing or duplicateddata occur, this function allows you to check whether or not the prin

—32—z Paper-endWhen the end of the roll of paper is detected, the ERROR LED lights. Load anew paper roll.z Paper cover openWhen the paper cover is ope

—33—The status display for various messages is shown below.Notes:*1: If the paper cover or front cover is open in standby.*2: If the paper cover or fr

—34—(Unit: mm)5. OTHER5.1 External Views and Dimensions195140132

—35—Use the paper shown in the following table or paper of the same quality.(Unit: mm)5.2 Printing PaperPaper type Product nameRecommended thermal rol

—36—Memory switches are used to set various printer settings. The memory switchescan be set manually (set by hand on the printer) or by commands. This

—1—GENERAL PRECAUTIONSz Before using this product, be sure to read through this manual. Afterhaving read this manual, keep it in a safe, readily acce

—37—Note:*: EPSON is a registered trademark of Seiko Epson Corporation.Individual setting modeSet the memory switches individually.Do the settings whi

—38—5. Press the FEED button for at least two seconds.A setting for the memory switch is printed, through the cycle, each time the FEEDbutton is press

—39—The function of each memory switch is shown in the following table. (Shadedvalues are factory settings.)Switch no. Function OFF ONMSW1-1 Power ON

—40—Notes: Precautions regarding memory switch settings*1: MSW2-3 If the spacing expands because print feed stops during printing because transfer of

TZ74967-00FA09754E-1103

—2—Before using this product for the first time, carefully read these SAFETY PRECAUTIONS.Improper handling may result in accidents (fire, electric sho

—3—PRECAUTIONS ON PRINTER INSTALLATIONWARNING Do not use or store this product in a place where it will be exposed to:* Flames or moist air.* Direct

—4—CAUTIONDo not use the printer under the following conditions. Avoid locations subject to vibration or instability. Avoid locations where the prin

—5—PRECAUTIONS IN HANDLING THE PRINTERWARNINGPlease observe the following precautions for power source and powercord: Do not plug or unplug the power

—6—CAUTIONCaution label is attached in the position shown in the following figure. Carefully readthe handling precautions before using the printer.