Citizen CLP-521 Bedienungsanleitung PDF herunterladen (Seite 17)

Setup

Connection to a Computer

This product has three interfaces that can be used to receive printing data: a

serial port (RS232C), parallel port (IEEE1284), and a USB port (USB1.1).

An optional internal Ethernet (LAN) or Wireless LAN (WiFi) port can be added

by your dealer.

With the exception of a wireless LAN connection, an interface cable is

necessary to connect the printer to a computer.

To connect the cable, proceed as follows:

1. Turn OFF both power switches of the printer and the computer.

2. Connect one end of the interface cable to the interface connector

on the back of the printer and secure it with locks or locking

screws, where available.

3. Connect the other end of the interface cable to the interface

connector on the computer and secure it with locks or locking

screws, where available.

Serial Interface Cable

USB Interface Cable

Parallel Interface Cable

Note: If the optional Ethernet or wireless LAN port is used, the standard

parallel port is removed from the printer, so the parallel interface cannot

be used.

Serial interface (p.45)

Parallel Interface (p.47)

USB Interface (p.50)

Replacing the Interface

Board (p.51)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 53 54

Keine Kommentare

Citizen CLP-521 Bedienungsanleitung Seite 17