Citizen C70 Spezifikationen PDF herunterladen (Seite 106)

II Parameters

Base Specifications Parameters

II - 13

【#1104】 T_Com2 Tool command method 2

Select how to handle the tool command in the program when "#1103 T_Life" is set to "1".

0: Handle the command as group No.

1: Handle the command as tool No.

【#1105】 T_Sel2 Tool selection method 2

Select the tool selection method when "#1103 T_Life" is set to "1".

0: Select in order of registered No. from the tools used in the same group.

1: Select the tool with the longest remaining life from the tools used or unused in the

same group.

【#1106】 Tcount Life management (for L system only)

Select the input method when address N is omitted in inputting the data (G10 L3 command)

for tool life management function II.

0: Time specified input

1: Number of times specified input

【#1107】 Tllfsc Split life management display screen (for L system only)

Set the number of groups to be displayed on the tool life management II (L system) screen.

0: Displayed group count 1, maximum number of registered tools: 16

1: Displayed group count 2, maximum number of registered tools: 8

2: Displayed group count 4, maximum number of registered tools: 4

【#1108】 TlrectM Life management re-count M code (for L system only)

Set the M code for tool life management II (L system) re-count.

---Setting range---

0 to 99

【#1109】 subs_M Validate alternate M code

Select the user macro interrupt with the substitute M code.

0: Disable alternate M code

1: Enable alternate M code

【#1110】 M96_M M96 alternate M code

Set an M code to replace M96 when “#1109 subs_M” is set to “1”.

---Setting range---

3 to 97 (excluding 30)

【#1111】 M97_M M97 alternate M code

Specify an M code to replace M97 when #1109 subs_M is set to 1.

---Setting range---

3 to 97 (excluding 30)

【#1112(PR)】 S_TRG Validate status trigger method

Select the enable conditions for the user macro interrupt signal (UIT).

0: Enable when interrupt signal (UIT) turns ON

1: Enable when interrupt signal (UIT) is ON

【#1113(PR)】 INT_2 Validate interrupt method type 2

Select the performance after user macro interrupt signal (UIT) input.

0: Execute interrupt program without waiting for block being executed to end

1: Execute interrupt program after completing block being executed

【#1114】 mcrint Macro argument initialization

Select whether to clear statements other than specified arguments by macro call.

Also select whether to clear local variables by power-ON and resetting.

0: Clear the non-specified arguments by macro call.

1: Hold non-specified arguments by macro call

2: Hold non-specified arguments by macro call, and clear local variables by power-ON

and resetting

【#1115】 thwait Waiting for thread cutting

Set the queue number during screw thread cutting when chamfering is disabled.

---Setting range---

0 to 99 (Approx. 4 ms)

Standard setting value: 4

【#1116】 G30SLM Invalidate soft limit (manual operation)

Enable this function when disabling the soft limit check function at the second to fourth

reference position return.

0: Enable soft limit function

1: Disable soft limit function

【#1117(PR)】 H_sens Handle response switch

Not used. Set to "0".

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 384 385

Kommentare zu diesen Handbüchern

Darricknus 16 Feb 2024 | 10:14:18

Hello Guys, Glad to Join! :)

Citizen C70 Spezifikationen Seite 106

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Citizen C70