Citizen C70 Spezifikationen PDF herunterladen (Seite 108)

II Parameters

Base Specifications Parameters

II - 15

【#1131】 Fldcc

Not used. Set to "0".

【#1132】 CRT

Not used. Set to "0".

【#1133】 ofsmem Select how to set up tool wear compensation screen

Select whether to display the # number stored at the previous setup, when selecting the tool

compensation screen.

0: Not display the # number when selecting the screen.

1: Display the stored # number when selecting the screen.

【#1134】 LCDneg

Not used. Set to "0".

【#1135】 unt_nm Unit name

Set the unit name.

Set with 4 or less characters consisting of both alphabets and numbers.

If "0" is set, the unit name won't be displayed.

---Setting range---

4 or less characters consisting of both alphabets and numbers

【#1138】 Pnosel Select screen by parameter number

Select whether to enable the function to select a screen by specifying a parameter number.

0: Disable

1: Enable

【#1139】 edtype Edit type selection

Select an edit type.

0: Screen edit type (M50 or equivalent operation)

1: Screen edit type

(The screen of EDIT or MDI is changed automatically according to the selected

operation mode.)

2: Word edit type

(The screen of EDIT or MDI is changed automatically according to the selected

operation mode.)

【#1140】 Mn100 M code number

Set the first number of M code that corresponds to the setup Nos. from 100 to 199.

---Setting range-

0 to 99999999

【#1141】 Mn200 M code number

Set the first number of M code that corresponds to the setup Nos. from 200 to 299.

---Setting range---

0 to 99999999

【#1142】 Mn300 M code number

Set the first number of M code that corresponds to the setup Nos. from 300 to 399.

---Setting range---

0 to 99999999

【#1143】 Mn400 M code number

Set the first number of M code that corresponds to the setup Nos. from 400 to 499.

---Setting range---

0 to 99999999

【#1144】 mdlkof MDI setup lock

Select whether to enable MDI setting in non-MDI mode.

0: Disable MDI setting

1: Enable MDI setting

【#1145】 I_abs Manual ABS parameter

Select how to handle the absolute position data during automatic handle interrupt.

0: Absolute position data will be renewed if manual ABS switch is ON. If it is OFF, data

won't be renewed.

1: Follow the "intabs" state when "#1061 intabs" is enabled

【#1146】 Sclamp Spindle rotation speed clamp function

Select how to handle the spindle rotation speed clamp function with the G92S command.

0: G92S command is handled as a clamp command only in the G96 state (during

constant surface speed control).

G92S will be handled as normal S command in G97 state (constant surface speed

OFF).

1: The S command in the same block as G92 is constantly handled as a clamp

command

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 384 385

Kommentare zu diesen Handbüchern

Darricknus 16 Feb 2024 | 10:14:18

Hello Guys, Glad to Join! :)

Citizen C70 Spezifikationen Seite 108

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Citizen C70